FOD is the abbreviation for “Foreign Object Debris” and means contamination by foreign objects (fluff, hair, material residues) on the surface. This abbreviation is often used in the IPC-A-600, IPC-A-610, IPC-6012 and contradicts “Foreign Object Damage” (FOD) which is often [...]
Yes. This is explained in the IPC-6012 training and also in the IPC-A-600, IPC-A-610 and J-STD-001 training program.
This is stated in a table in the J-STD-001 and in the IPC-6012 standard.
This is stated in the IPC-4552 standard.
In the IPC-4552 standard.
Yes, this repair procedure is described in the IPC-7711/7721 standard. The maximum size of a delamination depends on the product class. This is described in the IPC-A-600, the IPC-A-610 and IPC-6012 standard.
AABUS is the abbreviation of “As Agreed Between User and Supplier”. This abbreviation often occurs in an IPC standard.
Yes, IPC has made a product classification in every standard, including the IPC-6012. This product classification is as follows: IPC-6012 Class 1 - General electronic products (e.g. consumer electronics, these are products where the main requirement is the function of [...]
IPC has 3 product classes: class 1 (consumer electronics), class 2 (industrial electronics) and class 3 (high reliability electronics). The customer may determine the product class in which the product must be produced. It is important that the inspector knows [...]