Used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced [...]
IPC-9252 defines levels of appropriate testing and assists in the selection of the test analyzer, test parameters, test data and fixturing required to perform electrical test(s) on unpopulated printed boards and innerlayers. Revision B provides new requirements for resistive and [...]
This full-color document provides design and critical process requirements and technical insight for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. This standard also includes an Excel spreadsheet Verification and Compliance checklist. Number of [...]
This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration [...]
This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, [...]
The industry's sole guideline on the handling, packaging and storage of printed boards. The guidelines in this document are intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging material types [...]
IPC-A-600J Acceptability of Printed Boards, the definitive illustrated guide to printed board acceptability! This four-color document provides photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. Make sure [...]
This standard enables board manufacturers to develop requirements, policies and practices for protecting customers' intellectual property (IP). It also serves as the basis for an IPC certification audit program to ensure a facility is in compliance with this IP standard. [...]
The purpose of the IPC-1072 standard is to provide requirements and best practices for EMS companies to ensure protection of intellectual property for their customers. By using this standard, EMS companies can provide their customers assurance that the intellectual property [...]
IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that [...]
